Ormsby GTR Series Metal X Run #11 Flame Maple Top Grold 2021 w/OHSC
Ormsby GTR Series Metal X Run #11 with Flame Maple Top in "Grold" finish made in 2021 with Original Hard Shell Case. This guitar features a solid swamp ash body with a premium flame maple veneer top, 3-Piece maple set-neck and ebony fingerboard with a reversed color matched flame maple overlay headstock with taped off natural edges. Equipped with a Ormsby concordia humbucker in the neck position and a Ormsby blizzard in the bridge position. Controlled by 1 volume, 1 tone pot and a 3-Way toggle switch with push/pull tone coil tap. The 26.2" scale length neck has mother of pearl offset dot inlays and luminlay side markers with 24 jumbo stainless steel frets on a 16" radius with a "revised D" profile. The hardware is comprised of black ormsby branded sealed diecast locking tuning machines with cloche heads, a Floyd Rose locking nut, a Floyd Rose 1000 series double locking tremolo bridge and hipshot O-Ring knobs.
This guitar is in overall excellent condition with minimal signs of play. It has a few very light surface marks and a few very light dimples on its top you can see under direct light. The rubber o-rings on the control knobs are starting to crack but are replaceable. (See Pics)
Guitar is freshly setup and restrung with 9-54 strings. Includes Original Hard Shell Case, Original Case Candy.
Specs
- Brand: Ormsby
- Model: GTR Series Run #11 Metal X
- Year: 2021
- Finish Type: Polyurethane
- Finish: "Grold"
- Country: Korea
- Serial: GTR04848
- Condition: Excellent
- Weight: 9lbs 1.8oz
- Body Type: Solid
- Body Wood: Swamp Ash
- Top Wood: Premium Flame Maple Veneer
- Scale Length: 26.2"
- Neck Joint: Set
- Neck Wood: 3-Piece Rock Maple
- Neck Finish: Satin Natural
- Finger Board: Ebony
- Headstock: Reverse with Color Matched Flame Maple Overlay with Tapped off Edges
- Neck Radius: 16"
- Neck Profile: "Revised D"
- Neck Thickness@ 1st Fret: .760"
- Neck Thickness@ 12th Fret: .830"
- Inlays: Mother of Pearl Offset Dot
- Side Markers: Luminlay
- Nut: Floyd Rose Locking
- Nut Width: 48mm
- Frets: 24 Jumbo Stainless Steel
- Pickup Config: HH
- Neck Pickup: Ormsby Concordia Humbucker
- Bridge Pickup: Ormsby Blizzard
- Switch Arrangement: 3-Way Toggle Switch
- Pot Arrangement: 1 Volume, 1 Tone
- Coil Tap: Push/Pull Tone
- Hardware: Black
- Tuning Machines: Ormsby Branded Sealed Diecast Locking with Cloche heads
- Strap Buttons: Schaller Locking (Strap Locks Included)
- Bridge: Floyd Rose 1000 Series Double Locking Tremolo
- Knobs: Hipshot O-Ring
- Other Features: Original Case Candy
- String Gauge: 9-54
- Case: Original Hard Shell Case
Condition
- Overall Condition: ★★★★★
- Body Front: ★★★★✯
- Body Back: ★★★★✯
- Body Sides: ★★★★★
- Fret Board: ★★★★★
- Frets: ★★★★★
- Neck Back: ★★★★★
- Headstock Front: ★★★★✯
- Headstock Back: ★★★★★
- Headstock Sides: ★★★★★
- Hardware: ★★★★★
- Pickups: ★★★★★
- Bridge: ★★★★★
- Knobs: ★★★★✯
Ormsby GTR Series Metal X Run #11 Flame Maple Top Grold 2021 w/OHSC
Ormsby GTR Series Metal X Run #11 with Flame Maple Top in "Grold" finish made in 2021 with Original Hard Shell Case. This guitar features a solid swamp ash body with a premium flame maple veneer top, 3-Piece maple set-neck and ebony fingerboard with a reversed color matched flame maple overlay headstock with taped off natural edges. Equipped with a Ormsby concordia humbucker in the neck position and a Ormsby blizzard in the bridge position. Controlled by 1 volume, 1 tone pot and a 3-Way toggle switch with push/pull tone coil tap. The 26.2" scale length neck has mother of pearl offset dot inlays and luminlay side markers with 24 jumbo stainless steel frets on a 16" radius with a "revised D" profile. The hardware is comprised of black ormsby branded sealed diecast locking tuning machines with cloche heads, a Floyd Rose locking nut, a Floyd Rose 1000 series double locking tremolo bridge and hipshot O-Ring knobs.
This guitar is in overall excellent condition with minimal signs of play. It has a few very light surface marks and a few very light dimples on its top you can see under direct light. The rubber o-rings on the control knobs are starting to crack but are replaceable. (See Pics)
Guitar is freshly setup and restrung with 9-54 strings. Includes Original Hard Shell Case, Original Case Candy.
Specs
- Brand: Ormsby
- Model: GTR Series Run #11 Metal X
- Year: 2021
- Finish Type: Polyurethane
- Finish: "Grold"
- Country: Korea
- Serial: GTR04848
- Condition: Excellent
- Weight: 9lbs 1.8oz
- Body Type: Solid
- Body Wood: Swamp Ash
- Top Wood: Premium Flame Maple Veneer
- Scale Length: 26.2"
- Neck Joint: Set
- Neck Wood: 3-Piece Rock Maple
- Neck Finish: Satin Natural
- Finger Board: Ebony
- Headstock: Reverse with Color Matched Flame Maple Overlay with Tapped off Edges
- Neck Radius: 16"
- Neck Profile: "Revised D"
- Neck Thickness@ 1st Fret: .760"
- Neck Thickness@ 12th Fret: .830"
- Inlays: Mother of Pearl Offset Dot
- Side Markers: Luminlay
- Nut: Floyd Rose Locking
- Nut Width: 48mm
- Frets: 24 Jumbo Stainless Steel
- Pickup Config: HH
- Neck Pickup: Ormsby Concordia Humbucker
- Bridge Pickup: Ormsby Blizzard
- Switch Arrangement: 3-Way Toggle Switch
- Pot Arrangement: 1 Volume, 1 Tone
- Coil Tap: Push/Pull Tone
- Hardware: Black
- Tuning Machines: Ormsby Branded Sealed Diecast Locking with Cloche heads
- Strap Buttons: Schaller Locking (Strap Locks Included)
- Bridge: Floyd Rose 1000 Series Double Locking Tremolo
- Knobs: Hipshot O-Ring
- Other Features: Original Case Candy
- String Gauge: 9-54
- Case: Original Hard Shell Case
Condition
- Overall Condition: ★★★★★
- Body Front: ★★★★✯
- Body Back: ★★★★✯
- Body Sides: ★★★★★
- Fret Board: ★★★★★
- Frets: ★★★★★
- Neck Back: ★★★★★
- Headstock Front: ★★★★✯
- Headstock Back: ★★★★★
- Headstock Sides: ★★★★★
- Hardware: ★★★★★
- Pickups: ★★★★★
- Bridge: ★★★★★
- Knobs: ★★★★✯